3M Fit Test Adapter 601, Pack of 1, Reusable Respirator Fit Testing, OSHA

Use to conduct quantitative fit testing (QNFT) on 3M Reusable Respirators with certain sampling instruments, such as a TSI PortaCount Respirator Fit Tester

Designed to be used with the 3M Half Facepieces 6000, 6500/6500QL and 7500 Series, and Full Facepieces 6000, FF-400 and 7800 Series

Quantitative fit testing is required to obtain an OSHA assigned protection factor (APF) of 50 for full facepieces in negative-pressure air-purifying mode

Fit tests should be performed per OSHA Regulation 29 CFR 1910.134 – Appendix A

Package contents: adaptor, plastic tubing, suction cups, and a retainer clip

OSHA regulations require workers who need to wear a tight-fitting respirator to undergo a fit test prior to initial use of the respirator to determine adequacy of the respirator fit. Fit tests must also be conducted annually, or sooner if there is any change in a worker’s physical condition that could affect the fit. Changes in physical condition include significant changes in body weight, facial surgery, or major dental work. Refer to OSHA Regulation 29 CFR 1910.134 for full list of requirements.

For workplace/occupational use only. Not for consumer sale or use